Flash for Nikon cameras - YongNuo Speedlite YN968N II with I-TTL

Yongnuo YN968N II Nikon is the second version of the flash for the Nikon system from Yongnuo with built-in LED light. The flash has received a new modernized interface that is simpler and more convenient to use. The flash, when used outside the camera, supports the following modes: Optical TTL-slave Nikon Optical trap S1/S2 Slave mode from the master flash YN968N (YN968N II) Built-in receiver for the Yongnuo YN-622N radio synchronizer Built-in receiver for the Yongnuo RF-603II radio synchronizer Built-in receiver for Yongnuo RF-605 radio synchronizer Built-in receiver for Yongnuo YN560-TX transmitter Nikon YN968N II flash can work as a Master flash for YN968N(II), YN685N, YN622N(II). The flash is equipped with very bright LEDs, which can be used as a constant light when shooting video. When using constant light, smooth power adjustment is available. The LEDs are equipped with a sliding built-in wide-angle diffuser, as well as a removable warm orange filter. In the second version of the flash, the zoom of the reflector has been increased to the range of 20-200mm and the user interface for controlling modes and parameters has been improved. On the head of the flash there is a button for quickly turning on constant light; when this mode is activated, the brightness of the light from 5% to 100% becomes available on the screen. The flash has protection against accidental activation of continuous light and prohibits the use of this function when the head is tilted horizontally. Flash Features: Supports multiple timing systems. The YN968N II flash can operate as a master flash, i.e. in master-on-camera mode, or as a slave flash. The flash has a high guide number (GN60 at ISO100 105mm), supports high-speed sync (HSS) up to 1/8000 s. Equipped with a USB interface for software updates. Users can download the firmware update file from Yongnuo's official website. Supports automatic and manual zooming of the YN968N II flash head. The flash zoom can be adjusted in the range of 20-200 millimeters. Settings are saved automatically, there is support for individual user settings (Fn). The flash settings will be automatically saved when the flash is turned off, users can change the flash settings if necessary. Support external power supply Equipped with a large LCD display.