USB RFID ID RFID card reader BTB EM4100 EM4001 (7162)

The reader is used to read information from cards or radio frequency identification (RFID) tags of the EM4100, EM4001 (and other compatible) types with a frequency of 125 KHz. The card reader can be used in access control systems, automatic identification, robotics, item tracking, etc. Practical application: automatic lock for opening a door, drawer, cabinet, programmer for intercom keys, organization of warehouse accounting, etc. RFID (Radio Frequency IDentification, radio frequency identification) is a method of automatically identifying objects in which data stored in RFID cards is read or written using radio signals. To use the card reader, you need to connect it to your computer using a USB type A – Mini-USB type B cable (included). After connecting to the computer, the red LED on the reader body should light up and a single beep will sound. After this, your computer's operating system should begin searching for and automatically installing drivers. If the operating system was unable to install the drivers automatically, you need to do it manually. The card reader is compatible with Windows 95/98/ME/2000/XP/Vista/Seven operating systems. Then you need to install software to work with the card reader. Now you can test the reader: open any simple text editor in your operating system and bring a compatible RFID card with information to the contact area of ​​the card reader at a distance of 3 - 5 cm. A single beep should sound, and the data from the card will be displayed in the text editor. The card reader is powered from the computer's USB port. Specifications: Model: EM4100; compatible cards: EM4100, EM4001, others with a frequency of 125 KHz; compatible with OS: Windows 95/98/ME/2000/XP/Vista/Seven; reading range: 3 – 5 cm; communication interface: USB; dimensions: 105 x 70 x 15 mm; set weight: 99 g.