Tortoiseshell Leatt Body Protector 3.5 Graphene

The motor-turtle of Leatt Body Protector 3.5 the Protector of 3.5 Body consists of 2 parts: there is a compression suit on a lightning with the built-in protective overlays for a shoulder and elbows and also the belt regulated on height for kidneys. Then the rigid cover certified by CE, protection of a breast and back against blows from above is used. This modular system not only will provide you the maximum protection, but also will provide excellent ventilation and comfort. It is very easy to put on and remove this new concept that gives relief after the whole day of driving and does cleaning very simple, works both with a cervical fixer of Leatt, and without it. Has 17 points on protection of Leatt if you look for something with a bigger protection, including a side part, pay attention to protection of a body 6.5. Technical solutions: The general assessment of protection of Leatt® 17 points Soft shock-resistant Hard Shell foam and the ventilated 3DF AirFit CE soft foam it is tested and certified as protection against blows: The breast - prEN1621-3 Level 1 Back - EN1621-2 Level 1 Elbow and a shoulder of EN1621-1 3D - design provides ideal landing, convenience and a low profile. The separate modular compression jacket on a lightning on the center, with antibacterial processing, has the built-in protection of elbows and shoulders, intended for the maximum air flow, evaporation and the maximum comfort the Belt for kidneys with adjustment on height for an optimum adherence to a body. FIM is the Certificate of the International federation of motorcycles Removable front and back plates and the system of fastening of a cervical bandage BraceOnTM for fixing top / an undershirt of a cervical bandage Leatt® of Characteristic: Breast: EN1621-3 Level is 1 Back: EN1621-2 Level is 1 Elbows and shoulders: EN1621-1 FIM - the International federation of the Production of the USA motorcycles