Tribotechnical plastic grease UNIVERSAL PRO 370 gr. Is designed to increase the service life and the renewal of worn rolling bearings, gears, joints of equal angular velocities and other components that use plastic lubricants in their work. It is recommended to use for units that operate under severe conditions: heavy loads, dust, vibration and shock loads. The plastic grease includes molybdenum disulphide, corrosion inhibitors, extreme pressure and other additives, as well as the NANOPROTES friction geomodifier, which creates the conditions for forming a new protective layer on the friction surface, which creates the conditions for the formation of a new protective layer on the friction surface. The layer compensates for wear and much better keeps the lubricant in the friction zone.

Instructions for use:

Make sure that the unit that is treated with grease UNIVERSAL PRO does not have significant damage: cracks on the separator lintels, deep dents on the cage tracks, significant scoring and corrosion.

There are two ways to use grease:

A) if the design of the unit allows the replacement of the lubricant with a special syringe: "punch" the syringe until the plastic grease UNIVERSAL PRO begins to appear from the tube.

B) If the design does not provide special methods for changing the lubricant: - disassemble the unit, - clean the old grease, - wash the unit, apply the tribotechnical grease UNIVERSAL PRO, - assemble the unit. Effect from application: Renews worn friction surfaces. Increases the site resource. Reduces noise and vibration when the unit is operating. Reduces the energy loss of the node.