ntelligent lubricant composition (NSC) Nanoprotec GUR 60 is designed to restore performance and extend the life of the power steering.

Efficiency: The GUR 60 additive partially repairs the worn parts of the power-assisted pump, optimizes the gaps, allows you to keep a more dense oil layer on their surface, and cleans the spool mechanism. This allows to normalize the operation of the unit, to restore the pump pressure, which leads to a number of positive effects:

Easier rotation of the steering wheel. Normalization of the pump gives rise to a pressure of up to three kilograms, which makes it much easier to turn the rudder;

Noise and vibration are reduced;

Restoration of the power steering pump, cleaning of the bypass valves reduce noise and vibration during its operation;

Prolongs the life of the hydraulic booster. Restoration of worn parts, protection against wear under high loads and high ambient temperatures extends the service life of the unit by 1.5-2 times.

The order of application: Processing of the hydraulic booster of a wheel is made as follows:

Thoroughly mix the contents of the vial so that the sediment at the bottom is distributed throughout the volume of the liquid.

Add a half-bottle of ISK GUR 60 composition to the power pack (see marks on the label side).

Once the composition has been added, the machine can be used in normal operation mode. It is necessary to give the composition to work in the fluid of the hydraulic booster during 2000 kilometers of run.

After 2000 kilometers replace the hydraulic fluid in the hydraulic booster.

Stir the remainder of the formulation in a vial to distribute the precipitate over the entire volume of the liquid.

Add the second half of the bottle of GUR 60 in the reservoir of the hydraulic booster.

For GUR trucks and buses, the demand for Nanoprotec GUR 60 is determined from the calculation of 30 ml of composition per 1 liter of oil.

Additive Nanoprotec GUR 60 is compatible with any type of gear oil.