Revit Levante 2 H2O motor-jacket Go to the following adventure in a universal REV'IT biker jacket! Levante 2 H2O which will keep dryness and protection during the trip! It is an ideal motor-jacket for those who cannot choose between a waterproof or mesh jacket for summer trips. Levante 2 is intended for trips on the motorcycle in the spring, in the summer and in the fall! The three-dimensional design of an air grid is irreplaceable for riders, it is required to which will be cooled in the hottest days. Air promotes decrease in overheating when driving in hotter climate. The water tightness is provided with a removable insert of Hydrex | to Lite 2-v-1 which can be stored in a hip-pocket. This insert can be carried not only under external fabric, but also over it. When the internal lining is removed, through a jacket air thanks to big mesh panels in front, behind and on sleeves can get. The lightning on a cuff has several appointments. She facilitates an entrance to a sleeve, provides additional ventilation in warm days and allows to put on easily a glove cuff under outerwear and over a basic layer. Levante 2 H2O is completely equipped with protection of Seeflex CE-level 2 on shoulders and elbows and prepared for protection of a back and a breast of Seesoft. Thanks to structure with open structure they easily pass air; helping cooling of the pilot. It is prepared pockets for SEESOFT™ armor that gives to the driver additional tranquility on the road (are got separately). It is possible to put on or remove them easily and quickly, and they do not disturb daily trips. Big pockets for storage in front and behind will provide the place for your necessities on the way. The inside pocket on a waterproof lining is waterproof. Reflective panels provide excellent visibility at any angle, allowing to see the owner from all directions. Technological features: The multiseasonal biker jacket, is suitable for off-season and summer conditions Convenient landing Options of control and storage Is regulated on elbows, hands, hips and wrists Flexisn Fastener on a collar allows to regulate easily a circle of a collar and to personalize its landing for each racer. 3 external zipped pockets 1 inside pocket on a lining of 2 inside pockets Water tightness and ventilation the Waterproof slip / an inside layer of Hydrex Lite the Ventilating Windscreen 3D Air panels Mesh behind a front lightning an air Intake in an upper back Comfort the Double short connecting zip of the Detail of reflection: the laminated finishing, the laminated reflecting Cuff logo on a lightning For additional comfort an internal part of a collar is covered with soft fabric. Additional equipment at will: Prepared for protection of a back of SeeSoft CE-Level 2. It is prepared for protection of a breast of SeeSoft CE-Level 1 prepared for the Characteristic Connector NEON vest: For city and adventure riders the External layer from Dull 450D polyester, resistant to attrition, a grid, 3D Air Mesh Water tightness and air permeability: Hydratex Lite Structure: 100% polyester Lining: Grid Protection of shoulders and elbows of SeeFlex CE Level 2 Class AA: EN 17092 Is certified by CE Production Spain