AF 2005D Resun automatic feeder (Resan) with the LCD display. Products of Resun - a successful combination of the price and quality. The range of goods of this Chinese brand impressive - from aquariums to bactericidal UF-lamps and aquarian inhabitants accessories. The equipment Resun is certified and is used in more, than 70 countries of the world. The automatic feeder with the Resun AF-2005D LCD display will allow you not to worry about food of aquarian inhabitants during your absence (even at sudden blackout). It can work both in manual, and in the automatic mode (it is provided to the 8th feedings/day). The autonomy is provided with AAA-batteries (2 pieces). The optimal variant for granules and chips - forage volume on each feeding can be chosen independently. The drum is rather capacious therefore it is possible to fill up a lot of forage beforehand. The feeding trough has small dimensions therefore is suitable both for closed, and for open aquariums. The possibility of fastening to a wall or on a cover is provided.

Advantage of an automatic feeding trough Resan AF-2005D:

• independent operation without intervention of the person;
• simple input of programs by means of the display;
• modes for automatic feeding or manually;
• strong tight plastic casing;
• several options of installation.

Maintenance instruction.
1. Open an accumulator compartment cover, put two elements 2 x AA 1.5V of the battery (are not included in the package), do not use the recharged batteries which are not intended for use in this product. When the LCD display shows indication of "Lo", it means that the accumulator in your product has a weak charge and it needs to be changed urgently. If not to replace the accumulator within 3 days, all settings will be turned off, and the product can incorrectly work.
2. Installation of time and feeding:
- Press the SET button, figures of hours of "flash", press "ADJUST" to establish hours.
- Press the MODE button, minutes figure of "flash", press the CONTROL button to establish minutes.
- Press the SET button to save setting.
- Press the MODE button, the LCD display 00:00.
- Press the SET button, figures of hours of "flash", press the CONTROL button to adjust hours.
- Press the MODE button, Minutes figure of "flash", press the CONTROL button to establish minutes.
- Press the flash button "MODE", "1", press the button once, so to feed once, the LCD â display.
- Press the button twice, means feeding two times, the LCD ââ display, 1 minute of time between these two feedings.
- Press the SET button to save settings.
3. Repeat these actions for installation of another feeding time. If it is not required to determine other time of feeding, press the MODE button 4 times constantly to return for a while.
4. Change feeding time:
- Press the MODE button to choose feedings have to be removed, press the SET button for the choice, then press the MODE button twice to make programmed, and then press the ADJUST button to erase. Press the SET button before final confirmation.
- For editing any of programs, press the MODE button to enter the programmed feeding time, and then repeat.

Packing: AF 2005D

Producer: Resun, China