Description Relay U-Prox RM module

Relay U-Prox module

Main purpose of the relay U-Prox RM module of the ITV company under control of the network U-Prox IC E lift controller consists in ensuring appropriate access audit to buttons of floors of the building on the panel of the elevator which is provided after reading of contactless identifiers and introduction of the access code (in case of need). 4 modules of the relay are connected to the controller on the bus RS485. Surely by means of the ID switch it is necessary to select the identifier on bus (0, 1, 2 or 3). On each module 8 relays (NO, NC) with the sense light on everyone are placed that as a result services 32 floors of the building. On an input of the relay are switched a loop with control on current, and on an output – a loop of the button of election of the floor of the elevator. In case of extreme situations, on command from the computer the Easy access mode at which all buttons of the choice of floors are unblocked joins. It is possible after disconnection of a disturbing input on the module, in the investigation of what the control of all relays stops. Activation of tamperny protection is possible. Power supply from an external source of DC 12V. Overall dimensions of a board of the module: 112x88x20 mm. The module is placed in the room of control of the elevator.

Characteristic Relay U-Prox RM module

• Type relay module

• Type relay module
• Sizes, mm 75х75х30
• Working temperature 0 °C ~ +50 °C
• power Consumption 12 V of DC
• Guarantee, month