Pinlok on Mt HelmetV-28 crash helmet with the DKS 435 lock Plug-in lenses Pinlock® 70 is a solution of a premium class for MT helmets. The lens has the increased resistance to fogging that helps racers to see better in difficult weather conditions. The insert has silicone consolidation which creates the system of the double screen with a vizor. The lens is made of the moisture absorbing plastic therefore when using the surface practically dries. The insert of Pinlock absorbs moisture from within and provides constant accurate visibility Technological features: Pinlok of 100% of Max Vision as much as possible protects from fogging a vizor at the expense of specially created cavity. Silicone consolidation creates the system of the double screen between a front guard of a helmet and a lens of an insert of Pinlock. This tight pocket allows to lower considerably a difference of temperatures between the internal volume and the external environment. Special cuts holds a lens insert not movably and densely between pins. Hydrofilic is dry hydrophilic technology on which the membrane surface absorbing moisture is made. The lens easily washes and established Interchangeability with other Pinlock by a lens the Technology of 100% Max Vision® provides the maximum cover zone of a lens in the helmet screen. The increased covering of a lens of Max Vision reaches edges of a peak to provide the big area of protection against fogging. Is suitable only for MT helmets with front guards of MT-V-28,100% of Max Vision Harakeristiki: Color: Clear MT-V-28 Compatibility: MT Helmets: Thunder 4 Production Spain