Spyke Bora 2 motor-trousers are an ideally sitting trousers for campaigns with defensors and 4 pockets. Thanks to elastic inserts from material X-STRETCH and to a set of adjustable points which allow to adjoin to a body these trousers are very comfortable in use. Reflective zones, the certified removable kneecaps and shock-absorbing side inserts provide the highest level of safety, and four pockets allow to carry with themselves all necessary. The high belt provides additional protection of a waist of Molniya in the bottom of trouser-legs will allow to put on easily motor-footwear, and a fastener velcro it is good to fix a trouser-leg. It is easy to attach trousers to a motor-jacket, creating the finished image. Technological features: Sjemnye the kneecaps approved by CE, regulated on height. Sjemnye side inserts protectors. Elastic zones on a lap and a back part near a waist. 2 front pockets. 2 hip-pockets. Adjustment of a waist thanks to a fastener with a double velcro. Trousers are equipped behind with special reflective inserts. An adjustable fastener of a bottom of a trouser-leg with a zipper and a buckle. Trousers with the lightning below, approach any boot. Materials: External fabric: 100% soft nylon. Material of 100% of NYLON SOFT of the Panel from a high-strength polyester grid. Inserts X-In STRETCH a groin. The X-STRETCH Special construction technology including use of innovative elastomeric panels in a combination in weaving to high-strength polyamide threads (fabricX-for ensuring ideal comfort and two-dimensional elasticity. In motor-products fabric X-stretch is attached to a leather insert which thanks to special seams of strengthening extends on length and width that allows the pilot to move quickly and comfortably. A set-in lining from a polyester grid. Harakteristiki: Material of production: External fabric of 100% soft nylon. An internal lining from a poly-grid. Panels from polyurethane with a high resistance. Protection is approved by PN-EN-1621-1: 2012. All seams are executed according to the FprEN 17092 standard: 2018. Production Italy