The REVIT Torque Revit Torque motor-jacket will provide you a suitable biker jacket in many directions. Torque can be used during a heat and a rain. Big mesh inserts provide good air circulation in warm days, and the removable liner will protect from a rain. The model has smooth and strong appearance and was developed for wide audience. The special ergonomic cut allows a product to fit tightly a body, without holding down movements. REV'IT! Torque is made of polyester 600D, resistant to attrition, with use of the punched inserts. These materials are tactically distributed that you were in safety in those places where they are most of all necessary, and were ventilated in other parts. In this biker jacket the facilitated protectors are used. These defenders of Seesmart on shoulders and elbows have perforation and provide sufficient protection against blows. The removable lining of Hydratex G provides dryness during a rain, and a grid a cool - during a strong heat. Mesh material covers the most part of model. Tighten so that to provide sufficient ventilation. The rain lining passing through all biker jacket can be fastened when it is raining or when becomes colder. On a breast and behind there are additional reflective elements and also a logo on a back for additional visibility. Two logos on each side of a sleeve are made of eco leather. The model is prepared for additional protection of a back of SEESOFT CE Level 2 of the RV type thanks to a special pocket on a jacket back. However this additional protection is on sale separately. You can also adjust Revit Torque according to your parameters. It is very important when you are going to buy a jacket, especially on the Internet as at first it is difficult to find a way to try on a jacket. But thanks to the bigger number of adjusting devices (wrists, a hip, a collar, the top part of a sleeve) the chances that the jacket will well shrink, can be increased. The lightning sewed on all length has an internal wind-shelter level and is reliably fixed, and the stand-up collar is equipped with the button. Side external and inside pockets will contain all necessities. By means of the loop located on the back panel it is possible to attach a jacket to motor-jeans easily. The Revit Torque women's jacket, a fine ratio of the price and quality, is ready to hot weather, a rain and cold. Just adjust liners at discretion, and you will be able to continue to go to the exhausting heat, a rain and cold morning. Technological features: The used materials: Polyester 600D, an interlacing of polyester threads which create fabric of high density with excellent resistance to attrition. PWR | the Grid of Shell with open structure for improvement of air permeability and flexibility at preservation of comfort and safety Lorica Inserts for bigger resistance to attrition, are visually similar to skin, but it is easier than Characteristic: A pocket for a plug-in protector of a back of RV Level 2 SEESOFT the Removable lining of Hydratex®, a waterproof and wind-shelter membrane of CEESMART ™ the Certificate of CE on a shoulder and an elbow, removable the Lightning with short connection the Ventilating Adjustment of a Waist panels, hands and elbows of Feature: a windscreen behind a front lightning, a komfortnyyvorotnik. Through a special loop connect a jacket to motor-trousers that it did not rise century the provision of driving Inside pockets Pro-carved external pockets Production the Netherlands