The LS2 Riva LS2 motor-jacket represents the new summer punched textile Riva jacket. It is the light jacket providing excellent ventilation and sufficient safety. The external layer consists of panels from polyester fabric 600D with the maximum resistance to wear and attrition and a three-layer polyester grid for good ventilation in hot days. It is also delivered with the removable waterproof and breathing lining. It is very simple to remove a lining and to hide it somewhere if becomes you too hot during the trip. For comfort the collar is made on a soft lining, is well fixed paty on a velcro. All jacket is equipped with reliable lightnings of YKK. Sleeves, a collar and a bottom of model have zones of adjustment of volume. Two external zipped pockets, and in a jacket are one additional usual inside pocket and one waterproof pocket for the mobile phone. As for protection, removable humeral and elbow protectors of SE of level 1 are included in a basic equipment of this jacket certified according to EN1621-1 standard: 2012 level 1. To adjust adjustment so that it as much as possible protected you, the protector of an elbow has two available positions. In spite of the fact that the model is not delivered with protection for a back, for this jacket additional protectors are available to a back of D3O, SAS-TEC or LS2. Thanks to a zipper for connection with motor-trousers the jacket will not be lifted up at a speed, protecting your waist. Technological features: Model from polyester 600 D. Completely removable 100% a waterproof and wind-shelter membrane which can be stored in a special pocket of a jacket in a waist. Fleece lining of a collar. Reflective elements for increase in passive safety in the conditions of limited visibility. Zipper of connection of a jacket and trousers. Sleeve volume with an adjustable velcro of Adjustment on a cuff and a waist of 2 side pockets (zipper) 1 inside pocket 1 inside waterproof pocket for the Protection smartphone: Protective slips on a shoulder and elbows Strong seams in a zone of the increased risk. Removable humeral and elbow protectors of EN1621-1: 2012 level 1. A pocket for protection of elbows with an adjustable system, there are 2 possible positions of protection. Characteristics: Production material: Polyester 600D 92T Removable CE humeral and elbow protection of EN1621-1: 2012, level is 1 Certification: EN 17092-3: 2019 class AA Production Spain