The LS2 Bond motor-jacket New textile kurtkaLS2 Bond meets all requirements in test HQ Ride Expeditions. It very easily can become your favourite jacket for everything, from cruises on highways to a treylrandingaila simply poyezdokpo to shops... Warm LS2 Bond, waterproof is also equipped with the thought-over design features and appropriate protection. The outer sheath represents polyester 300D * 600D which rather strong and durable, but at the same time rather soft. Fabric rather clever to pass a part of air, to pass a part of moisture, but not to allow hit of a rain in inside. Inside there are a fixed waterproof membrane and a mesh lining, and for cold days there is a full-fledged winter lining which is zipped outside and is fixed at the basis of sleeves by means of loops and buttons. The LS2 Bond Textile jacket provides all protection which you expect from a modern biker jacket. There are removable humeral overlays of CE, with similar slips on elbows. Elbow pieces have two different versions of the provision If laying in warm linerenedostatochno, the Bond jacket has a hip-pocket and can be equipped with additional protection of a back from EVA foam material (is not certified) or replaced with something like D30 or SAS Tech. (a protector depending on your preferences.) Before installation of protection of a back do not forget to remove a protective film on a back of EVA it (is not certified) In front there are two breast pockets with a fastener on buttons, left is a vertical pocket which provides access when carrying a backpack, allows to store larger objects or can be left open for increase in air flow. Under them dual pockets from each party with the closed top valve on buttons and a separate entrance sideways to a zipped pocket are located. On inside of a jacket there are additional pockets, including completely waterproof for phone and higher for a purse which is on the main lining. Behind a jacket two big lightnings for summer ventilation are located. As for individual adjustment, Bond have adjusting buttons on sleeves, cuffs and on a jacket bottom, with the internal coulisse on a waist. The collar with an easy lining is buttoned on a thong and a buckle in classical style. The simple, but strong central lightning with fasteners velcros will provide reliable closing. Behind on a hem there is also a lightning for attachment of compatible trousers. As a road LS2 Bond jacket really well works. Good landing, not too dense, and with well thought over external and soft internal part you do not need to carry too many layers under it to feel comfortably. At the same time armrests are not really spacious around the lower parts. Sleeves are rather full that it was possible to fill winter gloves. The coulisse up to a waist guarantees that you can densely tighten it that the jacket did not move down at a speed, or you can fasten compatible trousers on a lightning. Remeshok on a neck also protects it from wind, providing it it is much better, than fasteners velcros. The jacket is not subject to machine wash therefore if you are going to leave in really brutal conditions, keep in mind that you, after the trip, will need to remove dirt, having wiped it with a sponge before carefully erasing manually. For very rainy conditions it is recommended to use external raincoats. LS2 Bond is well grouped, thought over and functional - it will serve to you for many years if it is correct to look after her. Characteristics: Outer sheath: Polyester fabric 300D * 600D Construction: Outshell the Fixed mesh lining the Fixed waterproof membrane the Removable winter lining from cotton the Removable shoulder of CE Protection of elbows of EN1621-1: 2012 Level is 1 Production Spain