The IXON Blaster Blaster motor-jacket is one of the most technical jackets, especially in terms of quality and performance of the used materials. This ideal decision if you like to travel around the open road to any weather. The Blaster jacket is certified CE, the class AA (EN17092-3). It has protection for shoulders and elbows and also an insert for protection of a back. It means that you can quietly focus on enjoying a trip. The jacket is calculated on any climatic conditions, even the most severe. For this task the waterproof, completely breathing membrane X-Dry and very warm, removable internal lining is provided. Vse materials of the highest quality: ripstop, the textured outer sheath, the ultrasonic thermofastened laying for the maximum thermoprotection and mesh 3D - inserts on jacket inside for air circulation improvement (in combination with the ventilated Ix-Proflex protectors). Big adjustable air vents on a lightning provide an additional opportunity for excellent air circulation in warm summer months. Technological features: Super strong fabrics: Polyester 600D + ripstop fabric (is not torn and is not torn). Outer protective sheaths of MotoGP™ of double density (1200D) on shoulders. The waterproof and breathing membrane fixed X-Dry (14000 Schmerber / 20000 MVTR). *** X Dry is the highly effective laminated membrane developed by Ixon. It has the microscopic time invisible with the naked eye. This time is rather small to hold water, but is rather big to take away sweat. Removable thermal liner (density: a body of 120 g, sleeves of 80 g) seamless, welded by ultrasound for uniform thermoprotection. Big adjustable air vents on a lightning on a breast, sleeves and a back. The model is certified by SE — class AA. Zashchita of elbows and shoulders of CE, flexible and ventilated — level 1. A pocket for protection of a back. Reflective prints on bicepses, behind on sleeves, on a back. 2 pockets for hands. 1 waterproof pocket for a purse. 2 inside pockets. 1 pocket on a lining. Lightnings with a semi-automatic fastener. Connection with trousers: a loop on a back. A classical high collar from a neoprene, soft velvety fabric inside. A zipper with the internal storm valve. A fastener button on a collar. Adjusting belts on a bottom of a product and cuffs. Pockets for protectors from a three-dimensional grid for the best air circulation (Ix-Proflex). Elastic corrugated inserts on the back of elbows. Characteristics: The Top layer fitting a cut: 85% polyester, 9% polyurethane, 6% nylon. Membrane: 87% polyester, 13% polyurethane. Podkladka: 100% polyester safety Level: AA EH 17092-3:2020 Production France