Motoshlem Successful model of folding Neotec3 helmet is ideal for Shoei Neotec 3 for daily trips around the city and also for long tours on the motorcycle. The big built-in sun-protection peak of QSV-2 provides excellent protection against bright light. Certified on the existing standard of tests of ECE-R 22.06Neotec3 it is also suitable for use with the raised jaw at the adapted speed thanks to certification of P/J. When a helmet is completely closed, the built-in deep ventilation system provides fresh air and cooling. The revolutionary Shoei Comlink interface provides ideal integration of the Sena SRL3 Mesh communication system. Smooth outer surfaces and passes reduce noise level for the driver and the passenger. The micrometric fastener on a pleasant tight podborodochny belt allows to put on and remove easily this model from Shoei. Technological features: Safety the Outer sheath of Shoei Neotec3 from AIM (Advanced Integrated Matrix) in combination with the filler from polystyrene consisting of several elements with the different absorbing ability provides the optimum protection against blows conforming to requirements of the standard of tests of ECE-R 22.06. Neotec3 equally conforms to requirements of this standard of tests for full-front and open helmets. In addition to the recommended use with the closed crossbeam for a chin, the second steady position of a latch also allows to use a helmet with the opened and blocked crossbeam for a chin. The standard transparent vizor of CNS-3C provides almost unlimited field of the review across and verticals. Pinlock®Evo lens attached to a vizor provides the free review even in adverse weather conditions. The pleasant tight podborodochny belt with a microlatch is comfortable in use and reliably holds a helmet on the place. The locking mechanism from stainless steel. Reliably fixes a chin crossbeam in a closed position. (XS-M | L | XL-XXL) the wide size range of a helmet and at the same time an optimum ratio to the motorcyclist's sizes allow to use comfort of 3 different sizes of an outer sheath. The good balance of weight protects muscles of a neck and prevents fatigue on various trips. The central stuffing with 3D - a contour, noise-insulating overlays for cheeks of the set form and protection of a thong. All these elements completely removable and washing. The central and shchechny overlays of different thickness are available to individual adjustment of a helmet (are on sale separately). The small pillow which can be inserted into the top part of the head can be used for adjustment of vertical landing of a helmet. Overlays for cheeks with a spacious bottom and removable embouchures effectively reduce noise. Standard CNS-3C prevents hit of air and water in a helmet thanks to the characteristic upper edge inclined to the case of a helmet. They can be opened, without turning, and it is safe to close thanks to the central locking mechanism. To provide additional fresh air during driving, the mechanism of a peak allows to open it widely. Vizor it is possible to replace without tools thanks to the self-regulating quick-change mechanism. The built-in high-quality sun-protection peak of QSV-2 smoothly moves forward and covers almost all useful field of the review, even down. It can be replaced easily with the additional view-finder with a yellow shade and effect of increase in contrast without any tools. It allows an additional peak to provide optimum visibility in various weather conditions. Uglubleniya in ears, the prepared cable guides and places for fastening of details of the device allow to install easily and quickly the SRL3 communication system from Sena. Ventilation Air vents provide an air flow to reduce temperature and humidity in a helmet. The removable filter in the lower part of front ventilation prevents hit of insects. The raised ventilating elements allow to operate a helmet even in thick gloves that does it suitable for use in zones with low temperatures or in cold season. Aerodynamics Smooth surfaces and transitions reduce resistance of air of a helmet and impact of noise by the user. The stable mechanism provides excentric rotation of a chin when opening and closing and allows to reduce gaps between a chin and the case of a helmet. The field of transition between a chin and the case of a helmet smooth that reduces turbulence around ears and the related noise. Characteristics: Vizor CNS-3C with the central castle. Adapted to the special SRL3 MESH communication system from SENA®. The built-in sun-protection peak (is 5 mm longer, than at the predecessor). 3 sizes of the case, 6 sizes: XS are XXL. EPS filler of different density. Double homologation of P/J. Micrometric fastener. Completely removable, washing internal part. Conforms to the standard of approval of ECE 22.06. Is included in the package: PINLOCK®EVO is adapted to a new vizor of CNS-3C. Removable chin. Stickers with the SHOEI logo. The tool for service, useful to installation of the SRL communication system. An original bag for a SHOEI helmet for storage of a helmet. Silicone oil for maintenance of tightness of the view-finder and the mechanism. Production Japan