Motoshlem of Just1 J18 Fiber glass J18 helmet combines modern design of graphics of Pulsar with the built-in system of protection of the head of MIPS. J18 which is carried by professional racers offers two sizes of a cover and two EPS sizes and also the new internal lining providing to racers bigger comfort on the route. Its well processed edges help aerodynamics, allowing air to pass through a helmet freely. In design there are several fine details which distinguish it from the others, for example, screws which hold a peak on the place, not just circles, they have the J1 form. A front part of a helmet is removable therefore it is not necessary to spend time trying to pick out the screw-driver dirt, you can just remove it, clean and again put on. It is also possible to add the extender to a peak. J18 completely osnashchenm the newest safety technologies of helmets. The model is delivered with polydirectional protection against blows of MIPS which represents a layer with low coefficient of friction which is between EPS foam (expanded polystyrene) and a lining of a helmet and allows the sliding movement from 10 to 15 mm in all directions. It is directed to reduction of transfer of rotary motion by your brain. The system of the emergency removal of a cheek J.1.ER is included in a basic equipment also. A helmet uses a classical double D-system, same, as well as the majority of helmets in the market. It weighs only 1250 grams that does it by one of the lightest helmets in the market, and you will really notice it when on the street dirt and your helmet it is covered with dirt). J18 can be used even with the widest and big glasses. Points conveniently sit in a helmet therefore, whatever points you chose, it is not necessary to worry about that, they will approach or not. J18 also have a section in the middle of a helmet for a thong of points, with edges above and below which prevent sliding of a belt of points up or down during driving. Technological features: An outer sheath from fiber glass the MIPS System 2 sizes of building 2 of the size EPS J.1.ER System of the Emergency Removal of a Cheek the Double system of deduction the D Internal lining for bigger comfort the Removable and washing internal lining Antimicrobic PROTX2™ technology, new processing of a lining. 9 inlet and 6 outlets Expansion of peak are switched on a Just1 J18 Pulsar Helmet are suitable for treylovy bikes, cross-country race, enduro, a cycle race, a cross-country. Characteristics: Sizes: The small case (XS/S / M) from 53 to 58 cm the Big case (L/XL/XXL) from 59 to 63 cm Certification of ECE - of 1250 gr +/-50 gr ECE 22.05 Weight: 1250 +/-50 g Production Italy