Revit Kinetic motor-gloves the Comfortable summer motorcycle Revit Kinetic gloves developed for off road terrain and double sports driving have an easy design with good ventilation. These gloves have a strong combination of textiles and leather to maximize an air flow, resistance to attrition and comfort and also offer a little additional covering with some easy safety of bones. At Revit Kinetic the palm, a thumb and finger-tips are made of goat leather with a water-repellent covering. The back of a hand is made of the material Revit PWR Knit, it is special knitwear with the reinforcing polyamide fibers for increase in durability of textile material. Index and average fingers are also covered with the additional protective film interfering gearing that increases durability of gloves. For comfort of a cuff are executed from the formed neoprene, and interdigital connections are made of the elastic Automan fabric providing total freedom of movements. These light gloves are intended generally for an off-road component of sports driving. For this purpose there are flexible shock-absorbing inserts of Temperfoam® for absorption of blow and resistance to penetration. To additional protection against blows of Temperfoam it is applied on a palm and fingers. A protective insert of PWR on a palm to increase resistance to attrition. Gloves have the certified protection of joints of fingers of CE of level 1 for safety. The comfort is provided with structural elements such as neoprene cuff, loop for the help at putting on and the thong regulating volume on a velcro. And the most important, with elastic fabric on fingers, knitting of PWR and flexible protection you receive the big range of movements as the flexibility is very important for driving on off road terrain. The big fabric Connect panels for finger-tips on index and a thumb for an opportunity to use these gloves for control of devices with the touch screen. Clasp a uvula on a cuff, and cold wind will prevent hit in a sleeve, holding hands in a comfort zone. Characteristics: Direction: sport Structure: 62% Skin, 22% Polyamide, 11% Elastane, 2% Polyurethane, 1% Polyester, 2% Another the Injection ventilated flexible joint Temperfoam® PWR Cam | a board on Palm the Slider for Temperfoam® palms Certification: the certificate of 1 RC level according to the Weight standard EN 13594:2015: 300 g Production: Netherlands