Revit Duty motor-gloves the Light ventilated motorcycle glove with optimum feeling of the motorcycle — the obvious choice for motorcyclists who need light summer gloves. Carefully thought over material selection does these gloves good protective, but that is more important, by lungs with total freedom of movements and unsurpassed feeling of feedback from your motorcycle. Thanks to tenacious fabric from microfiber with a silicone print on inside of gloves in combination with well ventilated three-dimensional grid outside a paving now in your hands. Joints of fingers are covered with convenient soft protection in combination with bones of fingers of TPR and a thumb of Temperfoam® and also protection of a palm with PWR | Shield. General breed of a hand too not idle time. The glove really well and reliably sits on a hand with the clasped thong on a wrist. The hand back generally consists of the blown materials therefore this glove is good for use in hot weather. Tips of index and big fingers are covered with the conducting material Connect Finger Tip therefore you can work with phone in gloves. Technological features: The wearproof punched goat skin in critical places Completely ventilated three-dimensional air grid 3D. Soft protection of joints of SEESOFT the Absorbing foam on joints, fingers and Usileniye's palm of the board PWR on a palm enter TPR Into joints of fingers. Parts of TPR are inserted into an outer sheath and do not disturb freedom of movement. The knitted lining has a pile for ensuring additional heat without increase in volume. Well absorbs sweat. A short cuff with a hook-and-loop closure of Akkordeonnaya an extension on fingers the Carrying-out Characteristic finger-tips: City and adventure motorcyclists For summer use production Material: 62% goat skin, 28% polyester, 5% polyamide, 5% polyurethane. Knitted lining. Elastic Automan fabric Certification: EN 13594, 2015, rating of 1 KP level. Proizvodstvo Netherlands