Sidi Mid Adventure 2 motor-boats the Novelty of 2020 - the shortened version of Sidi Adventure 2 Gore-Tex Mid. These shorter boots make the attractive choice for, focused on tourism, a rider of ADV which understands that it will leave on a track from time to time. Plus, there is a strong style which will be pleasant to the brutal judge of the city scrambler. It is very simple to put on Sidi Adventure 2 Gore-Tex Mid boots: release two strong buckles and unfasten the valve on a velcro from above. The opening more than is enough conveniently to slide a leg inside. Buckles volume and manageable, with the traditional sawtooth regulator on belts. Belts and buckles are quickly replaced in case of need. The Velcro tab allows to perform the last tuning. The lack of the hinge – is evident, but protection against twisting leaves a boot rigid. Adventure 2 Gore-Tex Mid boots look rather gracefully. Have a minimalist interior which gives you more direct feeling of pegs, pedals and the earth. It is suitable for the boots aimed at the market of adventure tourism and it is pleasant to wear them. Cambrelle cares for comfort with a teflon grid in the top part. Both do not absorb moisture therefore they can disseminate sweat and moisture, preventing formation of an unpleasant smell. A2 Mids are ready to work right after putting on. Despite a smart interior, boots have a lot of protection for a pedal of a brake and the lever of gear shifting. Adventure 2 Gore-Tex Mid do not look as street boots, at the same time they offer fine comfort during pedestrian tourism as the rigid heel and a relief sole seem natural on Terra Firma. And with the trousers covering them, they do not look as serious boots for campaigns. Thanks to the small size, if necessary to change the shoes, boats can easily be hidden in a wardrobe trunk. Passive safety is ensured thanks to the reflecting panel over a heel if your trousers do not shade it. Sidi developed boots especially for protection of legs and anklebones against off-road dangers, and Adventurer 2 Gore-Tex Mid boots achieve this objective. There is a lot of shock-resistant plastic, with a strong toe and a rigid heel. A2 Mids is inherent excellent water resistance that will help you in case of bad weather. Technological features: The top layer is made of wholegrain microfibre with the characteristics very similar to genuine leather. Wholegrain microfiber is not subject to aging, and all its properties are calculated for the long term of operation. Has very high mechanical properties, outstanding resistance to a gap and durability on a bend. It keeps the softness irrespective of influence of temperature, is the stable, breathing and water-repellent material. On characteristics it is better, than genuine leather. The membrane of Gore-Tex has high air permeability and water tightness. It contains more than 1.4 billion microscopic time on square centimeter. This time is 20000 times less than a water drop, but in 700 times more of a molecule of water vapor. Water from the outside will never get. Nevertheless, sweat can easily be removed therefore less moisture gets to isolation. As a result you remain warmer when it is cold also to the land when you sweat. A back part of a back part of panels of a shin protects an Achilles tendon. A nonskid rubber sole with an average relief. Two micro adjustable fasteners buckles with gear belts with memory adjustment. Buckles, belts and fixers are easily replaced. Buckles have only one point of fastening (by means of the screw) that allows to close them, I adapt a boot to position of the driver. Both buckles work independently of each other. This system allows a boot to adapt to all forms of feet and shins, doing a boot to more comfortable for each certain racer. A nylon internal sole with a removable arch. The strong uvula does an entrance and an exit easy. An exclusive fastener with the cam lock in combination with the top valve with a velcro and the elastic panel. Cambrelle lining. Nylon insole and removable support of an arch. Rigid, shock-resistant, a heel of an anatomic form with a hyper broach for the maximum protection. Internal antiwear heat-shielding panels from suede from an internal part of a boot. The reflective panel is located over a heel for night visibility. A nonslipping sole for the improved coupling. Marking of "CE" means that the product conforms to the main requirements for safety and occupational health of the European directive 89/686/EEC. Shift Pad. Characteristics: Top material: whole microfibre and suede Lining: GORE-TEX® membrane - waterproof the adjustable and replaceable clips breathing the material Closing of Velcro Strap Protection of Flex System System Reflective inserts Certification: SE. Production Italy