Description Maternal ROG ZENITH II EXTREME board

ROG Zenith II Extreme

ROG Zenith II Extreme especially for those who require complete control, and is ready to any tasks. It is designed to disclose all power of the latest processors of the 3rd generation of Ryzen Threadripper, saving at the same time thermal properties by means of the end-to-end solution for cooling. The maximum throughput of a band allows to connect at the same time up to 33 devices while each slot of PCIe x16 and M.2 is connected to PCIe® 4.0 - so you can freely install graphic cards of the next generation or the drives NVMe.

High-performance processors impose on

increased requirements to energy consumption because of abundance of kernels and channels of memory. The last developments of Threadripper are especially exacting therefore the intellectual design of VRM and qualitative components have the vital value - especially for the accelerated processors which approach limit of stability. In combination with our utility of the UEFI and AI Suite, ROG Zenith II Extreme setup recognized by critics offers available tool kit of manual adjustment and also the configured auto-tuner which maximizes system management and performance needlessly in expert knowledge.

Powerful architecture

Modern processors quickly reduce motherboard supply voltage, almost instantly passing from the modes of deep energy saving into the mode of an overall load. The newest architecture of VRM solves this problem, using the integrated power cascades for fast changing of current when saving model thermal characteristics. VRM boards praise for an opportunity to manage effectively the power of components and also due to decrease in voltage ripples. These advantages led to the fact that doublers of phases became standard in the industry, and today all of them are used for the similar purposes.

OPTIMEM III DDR4 4733MHz +

Optimized by means of signature settings of trace of memory which improve integrity of a signal and reduce noise, OptiMem III allows sets of memory to work with smaller delays and the lowered tension during the work at higher frequencies. Use Zenith II Extreme with favourite modules and maximize Threadripper processor throughput for applications which need huge throughput, or balance the performance of Infinity Fabric and memory for the broad range of workloads.

Connection

Existence of a band for power of several PCIe SSD and video cards, is a part of attractiveness of high-class desktop platforms. ROG Zenith II Extreme completely uses a 64-band possibility of Threadripper, allowing to connect up to 20 PCIe devices at the same time. Each PCIe x16 and M.2 is connected to PCIe 4.0, and the payment also accelerates both wire, and wireless networks - both with Aquantia of 10 Gbps Ethernet, and about the latest Wi-Fi 6 (802.11ax).

ROG Zenith II Extreme by

five drives M.2 for storage. Two on the ROG DIMM.2 module, near memory slots, also support disks to 110 m. There are two more slots under an aluminum cover of a radiator. Each of these slots supports the full throughput of PCIe 4.0 therefore they are compatible to the latest solid-state drives NVMe - creating conditions for the high transfer rates necessary for support of algorithms of machine learning and management of textures of games with high resolution.

TRX40 Platform is intended

USB

for the most exacting creators of content therefore Zenith II Extreme implements the latest USB standards. Ports, ready to use, are located on the back panel of input-output, and on the motherboard there are connectors on the front panel allowing to connect USB exactly there where it is necessary for you. ROG Zenith II Extreme is compatible to the latest version of USB 3.2 Gen 2x2. This latest USB standard doubles transfer throughput, opening one more band of USB 3.2 Gen 2 for achievement of the maximum throughput to 20 Gbps.

Cooling

Big power requires good cooling therefore ROG Zenith II Extreme uses big radiators of VRM which provide the correct balance between the surface area and weight. The radiator of a chipset includes the solution with active cooling, helping to support cold silicon under pressure and also uses the same air flow for cooling of SoC VRM. Very big radiators also cover several slots of M.2 that means that Zenith II Extreme is completely armed to provide the best basis for extreme conditions of the PC - providing higher performance at lower temperatures. ROG Zenith II Extreme includes our popular expansion card of fans II which adds six connectors managed through FanXpert 4. The card is equipped with three connectors for temperature sensors supplementing one available onboard and also is delivered with three thermistors which it is possible to attach to different components. In addition to delivery of additional headings for cooling, it provides three RGB connectors for ensuring effects of illumination for your RGB fan.

Audio

Sound is an integral part of game immersion. The built-in ROG Zenith II Extreme audio system integrates the latest SupremeFX S1220 codec with high-quality ESS Sabre. Experienced users, transmit a sound via several devices therefore our software Sonic Studio III has an intuitive control interface which allows to direct a sound from annexes to specific outputs. The payment even supports DTS® Sound Unbound technology for creation of three-dimensional sound sound landscapes which involve you to the virtual worlds.

Characteristic Maternal ROG ZENITH II EXTREME board