Sealing cover of a fork of Kriega Fork Seal Covers Increase service life of forks of USD with more effective protection against dirt and damages. Made of NEOSKIN (a neoprene with a covering). Easily is established it (is cleaned), dismantling of a fork is not required. Functions: It is very easy to establish consolidations of Kriega Fork. Ania are made of fabric with hooks and loops that means that dismantling of a fork is not required. Neoprene fork consolidations are most effective when they are new and clean. It is difficult to clean old fork knots. This design allows to clean them after each trip if it is necessary. Protective covers to be established without cable couplers, but it you will increase service life due to use of cable couplers for protection of Neokin of the slider of a fork. Note: a romper suit of forks in a full wrapper as it was on posts 2008 KTM and Husabergs, has very close admission to plastic rings of dustproof caps on the end of a fork and can wear out very quickly because of a neoprene covering of any brand. Overcome this problem - or install sliders of a fork of KTM of 2007 or remove black plastic rings on the end of a fork and use cable couplers at installation. With the protection cover and plastic rings the neoprene very quickly wears out. It does not influence the performance of fork consolidation as the opening is in noncritical area, but can look carelessly. Regardless of which you use the decision, it is worth using neoprene protection of forks as onasushchestvenno influences service life of your knot. Specification: Easy adjustment - a design with hooks and loops Easy cleaning - at each trip is not required to Use dismantling of a fork with or without cable couplers Only for USD Black with a silver logo Universal landing of NEOSKIN: a neoprene with a covering the Reflecting press Weight: 30 grams Production Great Britain can Also interest you: candles denso, motor-tires metzeler, motor-rubber of Bridgestone, a candle nzhk, a cover for the ATV, motor-tires shinko.