Wireless nurse and staff call button Retekess TH004, up to 80 meters, 38 melodies (100536)

Wireless nurse call button for staff up to 80 meters

Wireless nurse or staff call system Retekess TH004 this is a set of wireless call button and signal receiver with 38 melodies, which you can install in almost any room and use to call service personnel, nurses, and caregivers. The maximum communication distance is 80 meters in open space, and the call volume is 110 dB, which is enough even for large rooms. You can choose the melody of the signal itself from 38 preset melodies on the receiver.

The wireless button to call medical staff is autonomous and is powered by 2 AAA batteries, the possibility of desktop or wall installation. The receiver is plugged into a 220 V socket; on its body there are buttons for selecting melodies and setting the volume.

The main features of the staff call system are the signal transmission frequency of 433 MHz, which allows you to connect as many buttons and receivers as you need, as well as the large size of the call button itself, which is convenient for older people or in case of a sharp deterioration in health . The Retekess TH004 wireless system will help the elderly, people with special needs, and those who require special care, such as pregnant women, to quickly call and receive help in difficult situations.

Main features and characteristics

• Wireless medical calling system for the elderly and those who require special care.
• The operating frequency of the medical staff call system is 433 MHz, allowing you to bind several receivers to a call button or several buttons to one receiver.
• The wireless call button is large in size, making it easy and convenient to signal.
• Transmission range at a line of sight distance of up to 80 meters.
• Ring tone volume 110 dB. There are 38 ringing tones available on the receiver, which can be set to your own taste.
• Autonomous power supply of the call button from 2 AAA batteries, possibility of desktop and wall installation.

Brief operating instructions

1. Insert 2 AAA batteries into the power compartment of the nurse call button. Plug the receiver into a power outlet.
2. Check the connection between the call button and the receiver by pressing the call button. If the receiver does not respond to pressing the call button then link them to each other.
3. To bind a call button, press and hold the volume key on the receiver for 5 seconds until a beep sounds. Then click on the call button you want to link. You can link call buttons and receivers in any number.
4. To increase or decrease the volume, press the receiver volume button until the desired level is set.
5. To select tunes, use the receiver's up and down arrow buttons.

Specifications

• Frequency: 433 MHz.
• Modulation mode: ASK (AM).
• Maximum distance to the receiver: 80 m (in open space).
• Receiver power supply: 220 V.
• Power supply for the medical staff call button: 2 AAA batteries.
• Button installation type: tabletop, wall-mounted.
• Receiver signal volume: about 110 dB.
• Dimensions (L x W x H): 85 x 85 x 40 mm.
• Weight: 75 g.

Equipment

• Wireless staff call button Retekess TH004 - 1 pc.
• Signal receiver - 1 pc.
• Instructions - 1 pc.