This miniature observer is equipped with a special grid thanks to which it can catch even the most insignificant amount of smoke. In the device there is "a black box" where the total amount of smoke indoors is constantly fixed. That the sensor did not work in a false manner, you can configure it on that level which will seem to you dangerous. Thus, the alarm signal will join only after exceeding of the configured settings of smoke and temperature, but also you will be able to learn, for example, about whether your children indoors smoke. The sensor of smoke Fibaro notifies on the fire by a sound of a siren and blinking of the built-in LED. It is in addition possible to configure simultaneous opening of doors for the emergency evacuation from the house.

Sensor reacts not only to smoke. Temperature should increase sharply about 54 degrees as he distinguishes fire threat. Special production technologies allowed to manufacture the case which will protect the sensitive sensor even at 200ºС. You also easily will be able to determine area of a covering of your Z-Wave home network by this sensor. If its light-emitting diode the indicator becomes red, it is necessary to replace the location of the device. The green signal will show that the place vybiranny for the sensor allows it to contact the control block. The sensor very economically spends energy and does not require service – it it will be imperceptible, but always to watch closely your house and will always warn about fire risk. The device supports Z-Wave and Z-Wave Plus technologies.

Characteristic Fibaro smoke Sensor