The Motul ATV-UTV 4T 10W-40 engine oil is mineral engine oil from the well-known French brand, a leader in the market of lubricant means. Developed for the four-cycle ATV and UTV ATVs and also ATVs. Will be suitable for dry and couplings in an oil bathtub, for the integrated and not integrated transmission. It is optimized for use together with the catalytic systems purifying exhaust gases. Also Euro 3 meets requirements of the European norms of environmental protection of Euro 2. Thanks to specific additives increases durability of an oil film. Minimizes friction, thereby increasing the operational term of life of the engine. Is suitable for all types of gasoline and biological fuel. The JASO MA tests showed the low level of friction at start of the engine, dispersal and uniform speed. Oil has, perhaps, the most widespread type of viscosity of SAE 10W-40 which will be suitable for the majority of motors. Due to low volatility its consumption is cut. Oil self-cleans in the course of use, without polluting mechanisms. Counteracts oxidation and corrosion, has antifoam additives. It is authorized to mix oil with other synthetic and mineral oils. If you look for quality oil for four-cycle engines of ATVs and ATVs, we recommend to buy Motul ATV-YuTV 4T 10V-40. The physical and chemical Density Coefficient of Viscosity of SAE J 300 10W-40 properties at 20 °C (68 °F) of ASTM of D1298 0.864 g/cm3 Viscosity at 40 °C (104 °F) of ASTM of D445 100.1 mm2 / about Viscosity at 100 °C (212 °F) of ASTM of D445 14.9 mm2 / about the Index of viscosity ASTM D2270 156 Temperature of hardening of ASTM D97 - 30 °C Temperature of ignition of ASTM of D92 224 °C of TBN ASTM D of 2896 6.4 mg of KOH/g Production: France