The Motul 5100 4T 10W-50 engine oil is innovative means from one of the oldest European brands since 1853 working on creation of oils practically for all means of transport. In an asset of the company the invention of oil on the basis of cod-liver oil in the 19th century, development of the first in the history of semi-synthetic oil, and in the early seventies – receiving a heavy-duty film on the basis of esterovy connection which pressure to twenty two tons upon square centimeter is not terrible. The company it is unique approaches creation of optimum lubricant for specific models of engines. The Motul engine oils passed tests according to the Japanese JASO standards, are approved by the European standards of safety, and today are everywhere used by owners of a car - motor- and the water transport. Semi-synthetic oil for four-cycle Motul Oil motorcycles 5100 4T will be suitable for many four-cycle motors cross and a trial of motorcycles from integrated or not the transmission, with dry or damp coupling, but first of all - it is recommended for KTM and Huqsvarna engines where this class of viscosity is required. The class of viscosity 10W-50 is intended for krupnolitrazhny motors, guarantees protection of the engine at start. Oil is compatible to the catalysts or the recirculating systems of an exhaust meeting environmental standards of Euro 2 and Euro 3. The composition of sulfur and phosphorus for the best functioning of catalysts is reduced. The JASO tests confirmed ideal switching of speeds in an oil bathtub at various loading and temperature. Thanks to Technosynthese technology and esterovy base the friction considerably decreases and less the cursor wears out. It is authorized to mix oil with mineral and synthetic oils. If you look for quality oil for the engine of large volume, we advise to buy Motul 5100 4T 10W-50. Characteristics: Class of viscosity, SAE J 300: 10W-50 Density at 20 °C (68 °F), ASTM D1298: 0.873 Viscosity at 100 °C (212 °F), ASTM D445: 17.73 mm2/s Viscosity at 40 °C (104 °F), ASTM D445: 118.3 mm2/s Index of viscosity, ASTM D2270: 168 Point of change of fluidity, ASTM D97: -39 °C / -38 °F Point of flash, ASTM D 92: 218 °C / 424 °F Alkaline number, ASTM D2896: 8.2 mg KOH/g Category: API SL/SJ/SH/SG Test: JASO MA No. M033MOT056 Production: France