Brake shoes SBS Performance Brake Pads Sinter the SBS Performance Sinter Brake shoes (agglomerate) are recommended for new generation of high-performance sports, tourist and non-standard motorcycles which are initially equipped with brake shoes from ceramic-metal alloy. These brake shoes are more durable and heat-resistant, than other blocks, and work in the widest temperature range. Unfortunately, they produce a lot of brake dust and are much more aggressive in relation to other components of the brake system, especially to brake disks. At the same time they are good universal brake shoes, especially if you need to tow heavy load, to pull the heavy trailer, to press often brakes or to rush on the route. Perfectly is suitable for brake disks / rotors from stainless steel or cast iron. Strong initial capture, straight-line characteristics at a stop with good feeling of a brake and control. Technical features: An ideal combination of no-failure operation of braking, feeling from braking and thermal stability. Specially developed for sports driving and high loadings from heavy motorcycles. Lining of HS is safe for the rotor, performance is stable both in dry, and in damp conditions, and extra earnings are not required thermal. The best in the class and highly productive, developed for races and finished for street use. Structure (it is designated by two last letters of the part number): The baked HS compound intended especially for front brakes differing in especially high efficiency under any service conditions. Ideal alternative to original blocks. Only for front supports. The baked LS compound intended especially for back brakes stable in any service conditions. Production Denmark Sovmestimosts by models of motorcycles: BMW R GS 1250 (2019 - 2021); BMW R GS Adventure 1250 (2019 - 2021); BMW R RT 1250 (2019 - 2021); BMW R RT Sport 1250 (2019 - 2020); BMW S R 1000 (2020 - 2022); BMW S XR 1000 (2020 - 2021).