Austrian filler 100l for chair bag iQmebel. Comfortable packaging

Austrian balls for the iQmebel chair bag are denser and last longer than any balls before them. The difference between this filler and the others is that it is made from Austrian raw materials and has a higher density of granules, rustles less and shrinks less. It can be used for any bean bag chairas a topping.

Since the comfort of sitting in a chair depends not only on the material of the outer cover, but also on the quality of the filler, the Austrian filler is a higher priority when choosing balls for filling. It will be more comfortable to relax on a chair with such filling.

This parcel consists of two packages of 50 l each . This filler is supplied in branded convenient packaging with marks for cutting, detailed instructions and a QR code for video instructions.

The bag chair shrinks due to the weight of a person, and in order to restore all its properties, you need to add more balls. Usually 100 liters of filler are takento fill up chairs that have sagged by about 50%. If the chair is large, then 100-150l is recommended.

The final volume of granules for filling depends on the product model; you should focus on the initial volume of the bag and the approximate percentage of shrinkage.

Foamed polystyrene (expanded polystyrene, polystyrene foam) is a completely harmless and hypoallergenic material, which is 90% air! Granules 2-5mm are made from primary polystyrene, uniformly white in color without impurities. When unpacked, the pellets may have a slight plastic odor. The smell is not pungent, harmless and disappears quickly. Its hypoallergenicity is confirmed by a certificate of expert opinion of compliance with the Unified Sanitary and Epidemiological Requirements.

Features:

• the difference between this filler and the others is that it is made from Austrian raw materials and has a higher density of granules, less rustles and shrinks less
• supplied in branded convenient packages of 50 liters with marks for cutting, detailed instructions and a QR code for video instructions
• diameter of foam granules 2-5mm - the most optimal fraction;
• environmentally friendly and hypoallergenic product;
• the quality of the material is justified by the use of European technologies and European Austrian raw materials for production;
• primary balls are white, without impurities;
• tight packaging;
• it is convenient to fall asleep in a chair due to the correct packaging of 50 liter bags.

Additionally, the filler packages are packed in stretch film for safe transportation by mail.

Dimensions :

• Package size (WxHxD) - 25 x 58 x 44 cm;
• number of packages - 2 pcs, 50 liters each.

Dimensions in delivery packaging (WxHxD) - 43 x 60 x 50 cm

How to put balls in a chair bag ( There are also instructions on the package itself):

1. Prepare a vacuum cleaner, scissors, and, if possible, a spray bottle of water.

2. Remove the outer cover, if present, and open the zipper to add balls. To reduce the electrification of the material, you can additionally moisten the zipper with water from a spray bottle. Water will relieve static tension and the balls will not fly apart in different directions.

3. Carefully cut the corner of the bottom of the bag at the mark and empty until the chair is full. If the contents of one package were not enough, take a second one. Remember, the chair should take the shape of the body well, be soft and comfortable for sitting .

4. Close the zipper and put on the outer cover of the chair.

5. Collect the scattered balls with a vacuum cleaner. The rest of the balls in the bag can be used for the next filling.

6. Enjoy the comfort of the updated chair!

Extensive video instructions are available on the website in the video tab.

If you don’t have enough filler, you can always order more from us in any volume.

We also recommend using this filling together with new soft polyester fibers. After all, the two-component filling will make the chair many times softer and allow it to take the shape of the body in a new way.

Additionally you can order:

• Pouf as an accessory for a chair (you can lie with your feet on the pouf, use it as a stand , table or separate seating area);
• New and improved filling with soft fibers (the chair is softer, takes the shape of the body better, shrinks less over time);
• New outer cover for the beanbag chair to completely update its appearance;
• New inner cover if the old one is already very worn out.

1. Prepare a vacuum cleaner, scissors, and, if possible, a spray bottle with water.

2. Remove the outer cover, if present, and open the zipper to add balls. To reduce the electrification of the material, you can additionally moisten the zipper with water from a spray bottle. Water will relieve static tension and the balls will not fly apart in different directions.

3. Carefully cut the corner of the bottom of the bag at the mark and empty until the chair is full. If the contents of one package were not enough, take a second one. Remember, the chair should take the shape of the body well, be soft and comfortable for sitting .

4. Close the zipper and put on the outer cover of the chair.

5. Collect the scattered balls with a vacuum cleaner. The rest of the balls in the bag can be used for the next filling.

6. Enjoy the comfort of the updated chair!

Extensive video instructions are available on the website in the video tab.

If you don’t have enough filler, you can always order more from us in any volume.

We also recommend using this filling together with new soft polyester fibers. After all, the two-component filling will make the chair many times softer and allow it to take the shape of the body in a new way.

Additionally you can order:

• Pouf as an accessory for a chair (you can lie with your feet on the pouf, use it as a stand , table or separate seating area);
• New and improved filling with soft fibers (the chair is softer, takes the shape of the body better, shrinks less over time);
• New outer cover for the beanbag chair to completely update its appearance;
• New inner cover if the old one is already very worn out.

1. Prepare a vacuum cleaner, scissors, and, if possible, a spray bottle with water.

2. Remove the outer cover, if present, and open the zipper to add balls. To reduce the electrification of the material, you can additionally moisten the zipper with water from a spray bottle. Water will relieve static tension and the balls will not fly apart in different directions.

3. Carefully cut the corner of the bottom of the bag at the mark and empty until the chair is full. If the contents of one package were not enough, take a second one. Remember, the chair should take the shape of the body well, be soft and comfortable for sitting .

4. Close the zipper and put on the outer cover of the chair.

5. Collect the scattered balls with a vacuum cleaner. The rest of the balls in the bag can be used for the next filling.

6. Enjoy the comfort of the updated chair!

Extensive video instructions are available on the website in the video tab.

If you don’t have enough filler, you can always order more from us in any volume.

We also recommend using this filling together with new soft polyester fibers. After all, the two-component filling will make the chair many times softer and allow it to take the shape of the body in a new way.

Additionally you can order:

• Pouf as an accessory for a chair (you can lie with your feet on the pouf, use it as a stand , table or separate seating area);
• New and improved filling with soft fibers (the chair is softer, takes the shape of the body better, shrinks less over time);
• New outer cover for the beanbag chair to completely update its appearance;
• New inner cover if the old one is already very worn out.

6. Enjoy the comfort of the updated chair!

Extensive video instructions are available on the website in the video tab.

If you don’t have enough filler, you can always order more from us in any volume.

We also recommend using this filling together with new soft polyester fibers. After all, the two-component filling will make the chair many times softer and allow it to take the shape of the body in a new way.

Additionally you can order:

• Pouf as an accessory for a chair (you can lie with your feet on the pouf, use it as a stand , table or separate seating);
• New and improved filling with soft fibers (the chair is softer, takes the shape of the body better, shrinks less over time);
• New outer cover for the bean bag chair to completely update its appearance;
• New inner cover if the old one is already very worn out.

6. Enjoy the comfort of the updated chair!

Extensive video instructions are available on the website in the video tab.

If you don’t have enough filler, you can always order more from us in any volume.

We also recommend using this filling together with new soft polyester fibers. After all, the two-component filling will make the chair many times softer and allow it to take the shape of the body in a new way.

Additionally you can order:

• Pouf as an accessory for a chair (you can lie with your feet on the pouf, use it as a stand , table or separate seating area);
• New and improved filling with soft fibers (the chair is softer, takes the shape of the body better, shrinks less over time);
• New outer cover for the beanbag chair to completely update its appearance;
• New inner cover if the old one is already very worn out.