Acrylic unbreakable mirror Sticker Wall on self-adhesive, square 295x295x2mm (OS-MR-07)

It often happens when you need to hang a mirror in the hallway or in the bathroom. But this is not a cheap idea, since a good mirror is quite expensive, and to install a mirror you need a special tool (drill, hammer drill) and fasteners. A self-adhesive mirror will solve all these problems in an instant! Just peel off the protective film from the back and stick it where you want. It holds up well even in the bathroom where there is a lot of fumes.

A square-shaped acrylic self-adhesive mirror will fit perfectly into any interior, decorate the bathroom, become a cosmetic mirror or decorate furniture, doors and walls.

Characteristics

• Environmentally friendly (made from mirror acrylic);
• Suitable for any interior;
• Mirror dimensions 29.5 cm. x 29.5cm;
• Product thickness 2 mm;

*The front side is protected by a film, which must be removed after installing the mirror!

Advantages over a regular mirror

• Unbreakable;
• Does not require special fasteners;
• Does not distort the reflection;
• Light weight;
• Easy care;
• Easy to glue, no tools required.

Self-adhesive mirror, securely attached to a wall or other surface using an adhesive layer that is applied to the back of the mirror.

Attention! Before gluing (and ideally still at the post office), remove the protective paper from the mirror and make sure that the image is not distorted. The mirror must be glued to a dry and flat surface. Otherwise, distortion may occur.