ree shipping NANOPROTEC MAX TNVD 200 (additive)

Intelligent lubricating composition (ISC) MAX ТНВД 200 is designed to restore the performance and extend the life of high-pressure fuel pumps of diesel engines of any design in trucks and buses.

Efficiency: The intelligent lubricant composition MAX ТНВД 200 partially restores wear and optimizes the gaps in the plunger pairs, in the mating parts of the pump pumps. This allows you to achieve the following effects:

The pressure is restored. The pump provides output pressure within the performance limits, which ensures a normal supply of fuel to the combustion chambers;

Noise and vibration of in-line and distribution pumps is reduced;

The restoration of optimal coupling of the plunger pairs reduces vibration and, consequently, noise when the pump is operating;

The engine power is increased. Restoration of the fuel supply leads to an improvement in the quality of combustion of fuel, which ensures an increase in power and a reduction in fuel consumption by 3-5%;

The emission of harmful emissions by CO and HF decreases to 50%.

The order of application:

Stage 1: add the contents of the vial to the fuel tank of the car with a fuel balance of not more than 200 liters at the rate of 1 ml of ISK per 1 liter of fuel. Run up to the full output of fuel (indication of the minimum remaining fuel in the tank) without refueling. Refueling is to be done without using the MAX injection pump 200. The mileage between the stages must be at least 2000-3000 km.

Stage 2 is identical to the first. After the Nanoprotec MAX injection pump, the engine must run at least 20-30 minutes in any mode. This additive is compatible with any type of diesel fuel.

For injection pump of cars, the treatment is performed by adding fuel Nanoprotec ТНВД 100 to diesel fuel.

Перекладач Google для компаній:Translator T

#motor