MOTOTES 100 is designed to restore and protect against wear of two-stroke engines of mopeds, ATVs, boat engines, chainsaws and other machinery, including engines with separate lubrication system.

Efficiency: Intelligent lubricant composition MOTOTES 100 restores and protects against wear metal surfaces in friction nodes. Application ISK reduces friction losses, increases power, reduces fuel consumption, reduces noise and vibration.

The composition affects all friction surfaces, both in the cylinder-piston group, and in the crank-crank mechanism.

Instruction: Additive MOTOTES 100 is added to the engine working oil according to the following procedure:

Warm up the engine to operating temperature.

Stop the engine.

Thoroughly mix the contents of the vial, so that the sediment at the bottom is distributed throughout the volume of the liquid.

Fill the composition.

If the lubrication system is separate, fill half the vial into the oil tank.

If the lubrication system is common - pour the composition into the fuel tank at the rate of 5 ml of composition per 1 liter of fuel.

    5. Immediately after entering the composition, start the engine and let it run for 10-15 minutes.

To achieve maximum effect, the treatment is carried out in 2 stages. After 1000 km of run or 20 hours of engine running without Nanoprotec MOTOTES 100, the engine processing is identical to the first stage.

MOTOTEK is compatible with any type of fuel.

To preserve the parameters obtained, it is recommended to carry out subsequent processing after 1000-2000 km of run or 20-40 hours of engine operation.

The gearbox and gearbox are processed at a rate of 30 ml MOTOTES 100 per liter of oil.

It is recommended for motorcycles, motoblocks, boats, yachts, chainsaws, scooters, snowmobiles, jet skis.

#motor